I contacted our representative at Classic Accessories and he recommend a Model C Cover, which fits boats 16 feet to 18-1/2 feet long. view full answer...
The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover.
For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests... view full answer...
The Classic Accessories Boat Cover # 052963889482 should have no problem being used with an inboard/outboard motor as long as the dimensions of the boat are compatible with the cover.
This cover is designed for V-hull runabouts that are between 17-19 feet in length and a beam width of up to 102 inches.
I attached installation instructions for you to check out also. view full answer...
Yes, the Classic Accessories 9' Pontoon Boat # CA69660 includes a 2-position trolling motor mount along with oars and a cargo basket to hold your trolling motor battery, tackle box and beer cooler. It also features an adjustable seat, oar locks and foot rests so you can be comfy while catching your dinner.
The boat consists of three main parts (the two pontoons and the central tubular steel seat frame) so you will be able to easily handle each part separately. In total the boat weighs... view full answer...
I do have an option for you. The Classic Accessories Float Tube part # CA32014 is not motorized. It will allow you to float while fishing and most people use flippers part # CA63227.
The Classic Accessories 9' Pontoon Boat with Padded Seat - The Colorado - Green part # CA69660 does have a motor mount but you would need to add your own trolling motor because it does not come with it. view full answer...
No, you don't need an extender because the CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks # CE48870 you're looking at can house up to a 14' kayak so with your boat plus the motor being nearly 3' shorter you'll be just fine. view full answer...
I looked up pictures of your Saturn inflatable 12ft. boat and the motor can fold up and out of the way so you should be able to keep it on the boat in terms of ground clearance if loaded on the CE Smith Boat Trailer part # CE48810.
Unless Saturn states that the motor has to come off when on a trailer you would be totally fine to leave it on. view full answer...
The motor on the Bestop PowerBoard Motorized Running Boards, part # B7515215 is attached to the Jeep frame just in front of the rear wheel.
I have attached a photo that shows where the board attach bracket is located. If you are backing your boat into the water past the point where the motor for the rear bracket is installed, it may pose problems for you. view full answer...
The CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks # CE48810 is capable of carrying a boat that is up to 12' long and weighing up to 800lbs. The winch tower can be moved front to rear to get your Stryker LX 360 to sit properly with the majority of the weight on the front of the trailer. You may need to pack your additional gear in the front of the Stryker to ensure that there is not to much weight on the back of the boat since the majority of the weight will be in the back of your... view full answer...
Yes, it would. The CE Smith Multi Sport Plus Boat Trailer item # CE48870 is the best option for your True Kit Discovery 400. This trailer fits boats up to 14' in length and has a capacity of up to 800 lbs. This trailer will be perfect for your 13' inflatable boat and will have plenty of capacity for it and the motor.
Since you're going to be using this boat for a flat bottom inflatable, I recommend you mount the bunks perpendicular across the width of the trailer. This will offer you better... view full answer...
The BoatBuckle Trolling Motor Tie-Down part # IMF15437 is a universal trolling motor tie-down which measures 13-1/2" long therefore I see no reason as to why it would not work with a certain brand such as Motorguide. view full answer...
The Ark Ezi-Guides Self-Aligning Boat Trailer Loading System # AR64FR is categorized by boat length and not weight. I contacted the manufacturer with your question and they did not tell me a specific weight, but that the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System # AR64FR would be the correct system for your 13' boat. view full answer...
Yes, we offer several different bolt-on frame mounted hitches. There are several to choose from that are adjustable to fit many models of motor homes and can be adjusted to fit your chassis.
The frame mounted hitch is recommended because you can adjust it to fit your motor home and is better for towing as opposed to the bumper receiver hitch, part # E-100 that you selected. You will want to check with the motor home manufacturer before using the # E-100 hitch to make sure the bumper is... view full answer...
It looks like the Campion Allante 505 is approximately 16 feet, 7 inches long so you would want to look at covers for 16 to 18-1/2 foot boats such as # 052963889383 or # CA20085.
If your boat is a different length (not counting the outboard motor) let me know. view full answer...
The CE Smith's multi-sport trailer # CE48810 gives you the freedom to haul your boat. It can support a watercraft that is up to 12 feet long and that weighs up to 800 pounds. If you have the 12 Foot Klamath Deluxe Utility boat and your dimensions and specs are the same as below (please confirm with owners manual) you should have no issue carrying your boat with this trailer. As long as the fully loaded weight of your boat and your motor are below 800 lbs you should have no issue.
12’... view full answer...
I'm not sure exactly which Xpress aluminum 17 footer you have, but according to their website their heaviest 17 foot boat weighs in at about 1200 lbs, minus the outboard motor which can add up to 350 or so lbs to the weight of the boat.
You'll want to choose the BoatBuckle tie down whose combined break strength exceeds the weight of the boat and motor. The # IMF14220 has a break strength of up to 2500 lbs each, which would work perfectly for your Xpress bass boat.
If you click the provided... view full answer...
Since your Stryker LX 360 inflatable boat is 11'7" long x 5'6" wide it will fit on the CE Smith Multi Sport Boat and Kayak Trailer w/ Bunks - 8" Wheels - 12' Boat - 800 lbs # CE48810 you were looking at and have the motor/transom completely on the bunks, but the front half of the boat will not be. The bunks are only 4-1/2' wide so you will have about 6" overhang on each side of the trailer.
You will just want to move the winch mount forward until it is in the correct location for you to... view full answer...
To determine if this Classic Accessories Boat Cover # 052963889482 will fit on your 2002 Fourwinns Horizon 180 you will need to take some measurements of your boat.
This cover is designed to fit boats that are 17 to 19 feet in length and boats with beam widths up to 102 inches.
If you measure the length and width of your boat and it fits in those measurements this cover should work for you. If not, email me back with the measurements of your boat and I can hopefully find one that does fit. view full answer...
Great news!
I spoke with my contact at C.E. Smith and she informed me that the trailer # CE48810 that you were looking at will work great for your inflatable boat.
I have linked the trailer to this page for you purchasing convenience. view full answer...
The Classic Accessories Boat Cover by StormPro # 052963889185 fits 14 -16 foot boats with a beam width up to 75 inches. Since your boat meets those dimensions, the fact that it does not have a windshield is not going to affect how the cover fits. It features an integrated buckle and adjustable strap system as well as an adjustable elastic cord at the bottom of the cover to ensure a tight fit over your boat. view full answer...